Gas Leak Detector & Sensor Online

Gas leaks of toxic & combustible or flammable gases are unpredictable as they are principally invisible to the naked eye and it is of critical concern to the environment and safety of your onsite personnel and property assets. Defective gas appliances or piping can cause gas leaks anytime and anywhere. These systems stand guard 24 x 7 x 365 and protect, alert users and can even be setup to take corrective actions, leaving no guess work and thus avoiding disasters.

Gas Monitor Controller / Panel / Display Unit : Plus Series

Description

The Plus Series of gas monitors is our most economical, time tested and reliable gas monitor panel. It is wall mounted, connects to remote detectors and alerts the user when gas leaks are detected.

Features

  • Available in 1, 2, 5 and 15 channels for remote monitoring
  • Dust-proof Three-Status (TM) front panel
  • Latching alarm for acknowledgement
  • 3 points user selectable alarms
  • Built-in buzzer with external siren output
  • Potential free relay output
  • Compatible with Gas Tower Light

Accessories

Panel Mounting

Enclosures

Gas Tower Light

Siren

SMS Module


Gas Monitor Controller / Panel / Display Unit : MCS Series

Description

These digital, slim and compact microcontroller based controllers have all the features of Plus series with individual gas level display of various location in a single glance. It is wall mounted, connects to remote detectors and alerts the user when gas leaks are detected.

Features

  • Available in 1, 2, 5 and 8 channels for remote monitoring
  • Far view digital display with Three-Status (TM) alarms
  • Password protected menu
  • Self check and sensor fault indicators
  • No additional external enclosure required
  • Data logging on USB pen drive (optional)
  • Universal outputs : Relay, 4-20mA, MODBUS RS485

Watch the Product Video

Accessories

USB Datalogger

Relay Module

Gas Tower Light

Siren

SMS Module


Gas Monitor + Detector / Sensor / Transmitter : OTSM-1 Series

Description

On The Spot Monitors is a combination of Controller+Sensor packed in one unit, enables local site display for immediate action. Highly resistant to poisoning & etching. Multiple wall mounted OTSM's can be coupled to the Plus and MCS series of controllers or used as a stand alone detector / transmitter.

Features

  • Available for over 300 gases. Click here for list of gases.
  • Ex db IIC T6 Gb - Certified Flameproof & Weatherproof
  • IP-68 waterproof main enclosure.
  • Far view digital display with Three-Status (TM) alarms
  • Password protected menu
  • Self check and sensor fault indicators
  • Non-intrusive Magnetic Pen wand with light for setting
  • Universal outputs : Relay, 4-20mA, MODBUS RS485

Watch the Product Video

Accessories

Flameproof Siren cum Flasher

SMS Module


Gas Detector / Sensor / Transmitter Model : D1

Description

D1 is our entry level, metallic, robust and economical gas detector. This wall / surface mounted diffusion based detector sniffs the ambient air for target gas and is connected to the controller using a 2/3/4 core cable depending on the gas sensor

Features

Accessories

Z Clamp

Protective Cover / Canopy


Gas Detector / Sensor / Transmitter Model : FLP-1

Description

FLP-1 is a Flame-proof & Weather-proof Gas detector. Since it is designed to be used in proximity with the target gas, it is highly resistant to poisoning and etching. This wall / surface mounted diffusion based detector sniffs the ambient air for target gas and is connected to the controller using a 2/3/4 core cable depending on the gas sensor.

Features

  • Available for over 300 gases. Click here for list of gases.
  • Ex db IIC T6 Gb - Certified Flameproof & Weatherproof
  • IP-68 waterproof main enclosure.
  • Zone 1 & Zone 2
  • Gas Group IIA, IIB and IIC
  • Temperature Class T6
  • Dust Group IIC, EPL Db & Dc

Accessories

Z Clamp

Protective Cover / Canopy


Gas Detector / Sensor / Transmitter Model : CL2-1

Description

CL2-1 is an electrochemical based Gas detector. Since it is designed to be used in proximity with Chlorine. This wall / surface mounted diffusion based detector sniffs the ambient air for CL2 and is connected to the controller using a 3 core cable.

Features

  • Very specific CL2 sensing (0 to 5pm)
  • Low cross sensitivity to other cross-interference gases
  • 3 wire interface
  • Compatible with Plus and MCS series controllers

Accessories

Z Clamp

Protective Cover / Canopy


Gas Detector / Sensor / Transmitter Model : OXY-1 : NFP

Description

The OXY-1 : NFP is an economical dedicated oxygen detector. This wall / surface mounted diffusion based detector sniffs the ambient air for oxygen and can be connected to any controller using a 2/3 core cable depending on the type of gas sensor.

Features

  • Available for Oxygen range from 0 - 25% Vol.
  • Can be used with Galvanic or Electro-chemical sensors
  • Very specific O2 sensing
  • Low cross sensitivity to other cross-interference gases
  • 2/3 wire interface
  • Compatible with Plus and MCS series controllers
  • Controllers can offer High (23%) and Low (19%) alarms

Accessories

Z Clamp

Protective Cover / Canopy


Gas Detector / Sensor / Transmitter Model : OXY-1 : FLP

Description

The OXY-1 : FLP uses a Flame-proof & Weather-proof main enclosure. This wall / surface mounted diffusion based detector sniffs the ambient air for variation in oxygen levels and is connected to the controller using a 2/3 core cable depending on the type of oxygen sensor.

Features

  • Available for Oxygen range from 0 - 25% Vol.
  • Main Enclosure is certified Flameproof & Weatherproof
  • Can be used with Galvanic or Electro-chemical sensors
  • Very specific O2 sensing
  • Low cross sensitivity to other cross-interference gases
  • 2/3 wire interface
  • Compatible with Plus and MCS series controllers
  • Controllers can offer High (23%) and Low (19%) alarms

Accessories

Z Clamp

Protective Cover / Canopy


Domestic Home use Kitchen Gas Detector Model : Smell

Description

Kitchen gas (Natural gas) is odourless in it's natural form which makes it difficult to detect. The smell uses an audio visual alarm which warns the user incase of gas leaks. Its elegant design sinks with your existing modern kitchen interiors and acts as a safeguard from gas, smoke, solvents and heat.

Features

  • NG / LPG, Smoke, Solvents + Heat = all-in-one
  • No buttons with auto reset
  • Coloured confidence ring indicators
  • Compact modern design

Watch the Product Video

Watch the Product Video

Ready

Wait

Minute trace of gas sensed

Warning !
Rise in gas levels

!! Alert !!
High gas leack

!! Alert !!
Heat detected

Note

  • For domestic use only. NOT for industrial use
  • - Logo design trade mark number : 2710390
  • Design registration number from Government Of India - The Patent Office : 267995

Annual Maintenance Contract A.M.C.

Description

Maintenance of your gas detection system is as important as installing it. Our semi-compressive AMC is designed such that it will cover majority components.

Features

  • Semi-compressively designed contract
  • Covers all major component breakdowns
  • 4 visits per year
  • One re-calibration visit
  • Visits with prior planned appointments
  • Technical support
  • Test Report post visit

Our specifications may be subject to change without prior notice due to our ongoing research and development efforts to enhance all Subtronics products and ensure that they meet the latest standards.